| Processor |
| Number |
2 or 4 8-Core or 10-Core |
| Architecture |
Type: Intel Xeon E7-4800 Processor Series |
| CPUs |
Intel 2.00GHz 8-Core Xeon E7-4820
Intel 2.26GHz 10-Core Xeon E7-4860
Intel 2.40GHz 10-Core Xeon E7-4870
|
| Cache memory |
256KB unified (data and instruction) Level 2 cache
12MB, 18MB or 24MB shared inclusive Level 3 cache |
| Main Memory |
| Capacities |
DIMM slots: 64 DIMM slots, 16 DIMMs per CPU
DIMM type: Registered DDR3-1333 DIMMs
Registered DDR3-1066 DIMMs
DIMM size: 4GB, 8GB, 16GB
Maximum capacity: 1TB |
| Standard Integrated Interfaces |
| Network |
Four Integrated 10/100/1000 Base-T Gigabit Ethernet |
| Network Management |
One 10/100 Base-T Ethernet management port |
| Serial Management |
One TIA/EIA-232-F asynchronous RJ45 serial port |
| USB |
Front: 2 USB 2.0 Ports
Rear: 2 USB 2.0 Ports
Internal: 1 USB 2.0 Port |
| PCI Express |
10 PCI Express 2.0 Slots
- 2 slots (3 and 5) are either x8 or x16 electrical interface (x16 connector)
- 6 slots are x8 PCI-E slots
- 2 slots are x4 PCI-E slots
Note: Slots 3 and 5 operate as x16 interfaces only when an x16 capable card is
installed and the adjacent slot (4 or 6) is unpopulated. |
| Video |
One Rear and One Front HD15 VGA port |
| Graphics controller |
VGA 2D graphics controller embedded in Optional Service Processor
Support remote console at a resolution up to 1600x1200x16bits@60Hz
(1024x678 when viewed remotely via ILOM RKVMS)
Note: The rear VGA port supports VESA Device Data Channel for monitor identification. |
| Internal Mass Storage |
| Disks |
Up to 6 hot-swappable disks
Drive Type
|
Density
|
Speed
|
Form Factor
|
SAS
|
300GB, 600GB
|
10,000 RPM
|
2.5"
|
SATA
|
32GB
|
Solid State
|
2.5"
|
|
| Power Supplies |
Dual redundant, hot swappable power supplies
2060W Capacity (From 200 Volts to 240 Volts) |
| Environment |
| AC power |
100-127 VAC for 2 CPU's
200-240 VAC for 2 or 4 CPU's
50/60 Hz Nominal frequencies |
| Maximum Input Current |
12A @ 100VAC / 12A @ 200VAC |
| Maximum Power Consumption |
1800W |
| Maximum Heat Output |
6143 BTU/hr |
| Temperature |
Single, non-rack system:
Operating: 5° C to 35° C (41° F to 95° F)
Operating: 5° C to 32° C (41° F to 89.6° F) with HBA (SGX-SAS6-R-INT-Z) installed
Nonoperating: -40° C to 68° C (-40° F to 154°F) |
| Humidity |
Single, non-rack system:
Operating: 10% to 90% relative humidity noncondensing
Nonoperating: up to 93% relative humidity noncondensing |
| Altitude |
Single, non-rack system:
Operating: Up to 3048 m (10,000 ft.), maximum operating temperature is derated by 1° C for every 300 m (985 ft) above 900 m (2,952 ft).
Nonoperating: Up to 12,000 m (39,370 ft.) |
| Acoustic Noise Emissions |
LwAd (1B= 10dB) at max ambient: 8.9 B (idle and operating room temperature)
LpAm bystander at max ambient: 75 dBA |
Regulations
Meets or exceeds the following requirements: |
| Safety |
IEC 60950, UL/CSA60950, EN60950, CB scheme with all country differences |
| RFI/EMI |
FCC CFR 47 Part 15 Class A, EN55022 Class A, EN300-386, EN 61000-3-2, EN 61000-3-3 |
| Immunity |
EN 55024 ,EN 300 386 |
| Certifications |
Safety: UL/cUL, UL DEMKO, CCC, CE, BSMI, GOST-R, S-Mark
EMC: CE, FCC, VCCI, ICES, C-Tick, MIC, CCC, GOST-R, BSMI Class A
Other: Compiles with WEEE (Waste Electrical and Electronic Equipment) Directive (2002/96/EC) and RoHS Directive (2002/95/EC) |
| Dimensions and Weight |
| Height |
129.85 mm (5.1 in.) |
| Width |
436.5 mm (17.2 in.) |
| Depth |
732 mm (28.8 in.) |
| Weight |
Maximum: 38.5 kg (85 lb.) |
| Rack Mounting |
Sun Fire X4470 M2 Server Racks
( Using the Tooless Slide Rail Rackmount Kit X2365A ) |
Racks are as follows:
- Sun Rack 1242
- Sun Rack 1042
|
