¾ÆÀ̵ð / ºñ¹Ð¹øÈ£ ã±â
|
ȸ¿ø°¡ÀÔ
HP UNIX
HP NT
IBM UNIX
IBM NT
SUN
DELL
FUJITSU
ETC
HP UNIX
HP NT
IBM UNIX
IBM NT
SUN
DELL
FUJITSU
ETC
HP UNIX
HP NT
IBM UNIX
IBM NT
SUN
DELL
FUJITSU
EMC
HITACHI
STORAGETEK
ETC
CISCO
3COM
JUNIPER
EXTREME
NORTEL
FOUNDRY
BROCADE
ETC
HP UNIX
HP NT
IBM UNIX
IBM NT
SUN
DELL
FUJITSU
ETC
HP UNIX
HP NT
IBM UNIX
IBM NT
SUN
DELL
FUJITSU
ETC
HP UNIX
HP NT
IBM UNIX
IBM NT
SUN
DELL
FUJITSU
EMC
HITACHI
STORAGETEK
ETC
CISCO
3COM
JUNIPER
EXTREME
NORTEL
FOUNDRY
BROCADE
ETC
±èÁ¾¿ì ÆÀÀå
H.P : 010-8911-5099
mail :
jwkim@it-g.co.kr
±èÀϵ¿ ÆÀÀå
H.P :010-2337-3516
mail :
kidcan@it-g.co.kr
±è¼±µµ ÆÀÀå
H.P : 010-6361-4113
mail :
sdkim@it-g.co.kr
64513704000355
Home
> > Server > HP UNIX
Á¶È¸ : 4,607
HP UNIX rx4640
SM110535
Áß°í»óÇ°
CPU
4 * 1.5 GHz with 4 MB Level 3 Cache
MEM
4GB
HDD
2 * 146GB U320 10K SCSI
Àç°í
1 EA (½ÇÁ¦¼ö·®Àº ´Ù¸¦¼ö ÀÖÀ¸´Ï ¹®Àǹٶø´Ï´Ù.)
¼ö·® :
Overview
Standard Features
Configuration
Technical Specifications
Overview
HP Integrity rx4640 Server
1.
Two Reserved PCI-X slots for LAN and SCSI
6.
1 to 4 Intel? Itanium 2? processors
or
1 to 4 HP mx2 Dual-processor Modules
*
2.
Dual Hot Plug Power Supplies
3.
Rack Slides with Tool-free Installation
7.
Memory Board with 16 or 32 DIMM Slots
4.
Two SCSI Hot Plug Hard Disk Drives
8.
Row of Six Hot Plug N+1 Redundant Fans
5.
Optional Low-profile DVD Drive
9.
Six Available PCI-X Slots
*
NOTE:
Single Itanium 2 processors and HP mx2 two-processor modules cannot be mixed in the same system.
At A Glance
Standard System Features
Operating System support: HP UX 11i version 2 (September 2006 Update required for Dual core Intel Itanium 2 processors); Linux RHEL 4 U4, SLES 9 SP3, and SLES 10; OpenVMS V8.2 and higher (V8.3 is required for Dual core Intel Itanium 2 processors); and Microsoft Windows Server 2003, Enterprise and Datacenter Edition
Windows, HP UX and OpenVMS systems may be upgraded to Smart Array controller at time of order.
Dual port 10/100/1000Base TX LAN (with auto speed sensing; RJ 45 connector)
Management Processor for remote management and HA monitoring
Telnet and web console via 10/100Base TX management LAN (RJ 45 connector)
Three RS 232 serial ports linked to the management processor
Factory integration of processors, memory, disk drives, removable media, I/O cards, and system into rack
Rackmountable into 19 inch cabinets-HP Rack System/E and HP Universal 1000 G2 series as well as many third party racks
Optional stand alone pedestal mount
Three year warranty with next business day on site
Overview
Standard Features
Configuration
Technical Specifications
Standard Features
Minimum System
One Dual-Core Intel Itanium 2 processor; either 1.6-GHz/24-MB L3 cache or 1.6-GHz/18-MB L3 cache
Or One Single-Core Intel Itanium 2 processor; either 1.5 GHz/4MB L3 cache or 1.6 GHz/6 MB L3 cache, 1.6 GHz/9 MB L3 cache processors or one HP mx2 two processor module
*
(contains two 1.1 GHz Itanium 2
processors/one core each)
1 GB PC2100 ECC Registered DDR266A/B SDRAM (4¡¿256-MB DIMMs)
One 16 DIMM slot memory carrier board
One internal DVD drive for OpenVMS, Windows, and Linux
One hot swap power supply
*
NOTE:
mx2 two processor module is not support with Linux systems.
Maximum Server Capacities
Four Dual-Core Intel Itanium 2 processor; either 1.6-GHz/24-MB L3 cache or 1.6-GHz/18-MB L3 cache
Or Four Single-Core Intel Itanium 2 processor; either 1.5 GHz/4MB L3 cache or 1.6 GHz/6 MB L3 cache, 1.6 GHz/9 MB L3 cache processors or HP mx2 two processor module
*
(contains two 1.1 GHz Itanium 2 processors/one core each)
128 GB PC2100 ECC Registered DDR266A/B SDRAM (32¡¿4-GB DIMMs)
One 32 DIMM slot memory carrier board
Two hot swap power supplies, providing N+1 protection for power supplies and power input
6 PCI X IO adapter cards
One internal DVD ROM Slimline Drive, DVD ROM/CD+RW Slimline Drive (can write only to CDs), or DVD+RW Slimline Drive
Two internal hot plug LVD SCSI disks
*
NOTE:
The mx2 two processor module is not supported with Linux systems.
Standard System Features
Operating System support: HP UX 11i version 2 (September 2006 Update required for Dual core Intel Itanium 2 processors); Linux RHEL 4 U4, SLES 9 SP3, and SLES 10; OpenVMS V8.2 and higher (V8.3 is required for Dual core Intel Itanium 2 processors); and Microsoft Windows Server 2003, Enterprise and Datacenter Edition
Windows, HP UX and OpenVMS systems may be upgraded to Smart Array controller at time of order.
Dual port 10/100/1000Base TX LAN (with auto speed sensing; RJ 45 connector)
Management Processor for remote management and HA monitoring
Telnet and web console via 10/100Base TX management LAN (RJ 45 connector)
Three RS 232 serial ports linked to the management processor
Factory integration of processors, memory, disk drives, removable media, I/O cards, and system into rack
Rackmountable into 19 inch cabinets-HP Rack System/E and HP Universal 1000 G2 series as well as many third party racks
Optional stand alone pedestal mount
Three year warranty with next business day on site
High Availability
N+1 Hot swap cooling
One Hot swap power supply-optional second power supply for N+1 protection
Hot Plug PCI X I/O slots
On line memory page deallocation
ECC protected DDR memory
Memory chip spare to overcome single DRAM chip failures
Dynamic Processor resilience and deallocation
UPS power management
Hot Plug internal disks
Journal file system with HP UX
Auto reboot
HP Serviceguard for HP UX
HP Serviceguard Extension for RAC for HP UX
HP Serviceguard Extension for SAP for HP UX
Serviceguard Manager for HP UX and Linux Clusters
HP Event Monitoring Service
HA Monitors for HP UX
HA Toolkits for HP UX and Linux
HP Mirrordisk/UX
Extended Campus Cluster, HP Metrocluster, and HP Continentalclusters for HP UX
HP OpenVMS clusters
HP OpenVMS Volume Shadowing
HP RMS Journaling for OpenVMS
System Insight Manager for proactive fault management
Microsoft Cluster Service for Windows Server 2003, Enterprise and Datacenter Edition
HP StorageWorks Secure Path
HP StorageWorks Cluster Extension XP for Linux
Security
Separate LAN for system management
Password protection on console port
Disablement of remote console ports
SSL encryption on web console
Manageability
Deploy
HP Ignite UX for installation and deployment of the operating system
HP Software Distributor UX for software and patch management
HP Integrity Essentials Foundation Pack for Windows including Smart Setup CD for easy server setup and configuration
Monitor
Built in Management Processor for comprehensive remote server management of HP UX, Linux, Windows and OpenVMS
HP Servicecontrol suite for HP UX servers including tools for system administration, asset management, and fault management
HP UX kernel configuration for easy, dynamic kernel parameter changes
HP System Insight Manager (SIM)
Optimize
Process Resource Manager for HP UX resource management
HP UX Workload Manager for HP UX workload management based upon service level objectives
HP OpenView GlancePlus Pack
Overview
Standard Features
Configuration
Technical Specifications
Configuration
Processor Configuration
The HP Integrity rx4640 is a symmetrical multiprocessing (SMP) server supporting up to four high performance Dual-Core Intel Itanium 2 processors, or Single-Core Intel Itanium 2 processors, or four HP mx2 two processor modules.
Processor Details
Dual-Core Intel Itanium 2 processors
1.6 GHz with 24 MB Level 3 Cache (12-MB per core)
1.6 GHz with 18 MB Level 3 Cache (9-MB per core)
All dual-core processors support:
Level 2 Cache: 1-MB Instruction/256-KB Data per core
Level 1 Cache: 32-KB per core
Single bit cache error correction
50 bit physical addressing
64 bit virtual addressing
4 GB maximum page size
Single-Core Intel Itanium 2 processors
1.5 GHz with 4 MB Level 3 Cache
1.6 GHz with 6 MB Level 3 Cache
1.6 GHz with 9 MB Level 3 Cache
All processors support:
Level 2 Cache: 256-KB
Level 1 Cache: 32-KB
Single bit cache error correction
50 bit physical addressing
64 bit virtual addressing
4 GB maximum page size
HP mx2 two processor modules; each module contains two 1.1 GHz Itanium 2 processors/one core each (not supported with Linux based systems):
Level 4 Cache on processor module: 32-MB
Level 3 Cache: 4 MB
Level 2 Cache: 256-KB
Level 1 Cache: 32-KB
Single bit cache error correction
50 bit physical addressing
64 bit virtual addressing
4 GB maximum page size
Processor Configuration Rules
Processors can be installed one at a time
Processors must be installed in the following sequence: 0, 1, 2, 3
Processors cannot be mixed in the same system
The HP Integrity rx4640 servers may require a firmware update to support Intel Itanium 2 Processor Add on products shipping after June 15, 2005.
Affected Intel Itanium 2 processors products for the Integrity rx4640 are:
A9731A-Intel Itanium 2 1.5 GHz 4 MB
A9732A-Intel Itanium 2 1.6 GHz 6 MB
Action: Check server firmware prior to installing any of these processor products. The rx4640 requires system firmware 3.17 or later. The firmware version can be checked as follows:
Shell> info fw
Firmware information:
Firmware revision: 3.17 [4511]
BMC revision: 3.49
Management Processor Revision: E.03.15
Updatable EFI drivers:
Floating point Software Assistance Handler: 00000118
Broadcom Gigabit Ethernet Driver: 00070003
If firmware requires updating, the firmware upgrade instructions are included in the Release Notice that is included in the download bundle.
To download the firmware, go to
http://www.hp.com/bizsupport
.
NOTE:
After the firmware has been downloaded to the server, proceed with attaching the Processor Add on Products to the server using the Server Installation Guide. The installation guide is provided:
On the CD ROM that shipped with server
On the
http://docs.hp.com
Web site
Memory Configuration
The HP Integrity rx4640 supports double data rate (DDR) synchronous dynamic random access memory (SDRAM) DIMMs with ECC and chip spare protection. The HP Integrity rx4640 can be ordered with one of the following two memory carrier boards:
A9738A-Supports from 4 to 16 DIMMs (1 to 64 GB); 12.8-GB/s memory bandwidth
A9739A-Supports from 4 to 32 DIMMs (1 to 128 GB); 12.8-GB/s memory bandwidth
Both memory carrier boards provide the same bandwidth to the processors. The primary difference between the two boards is in total memory capacity.
Memory Loading Rules
Memory must be installed in groups of four DIMMs, also known as quads
Each quad must consist of equal density DIMMs
Memory can be ordered in quads of 1-GB (4¡¿256-MB), 2-GB (4¡¿512-MB), 4-GB (4¡¿1-GB), 8-GB (4¡¿2-GB), or 16-GB (4¡¿4-GB)
Minimum memory is 1-GB (4¡¿256-MB)
Maximum memory is 128-GB, using eight 16 GB memory quads in memory carrier board A9739A
Memory must be loaded in the order depicted on the memory carrier board
Arrange DIMMs so that the quads with the largest capacity are in the lowest numbered slots.
Memory Options
Description
Product Number
1-GB DDR memory quad (4 x 256MB DIMMs)
A6967A
2-GB DDR memory quad (4 x 512MB DIMMs)
A6968A
4-GB DDR memory quad (4 x 1GB DIMMs)
A6969A
8-GB DDR memory quad (4 x 2GB DIMMs)
A6970A
16-GB DDR memory quad (4¡¿4GB DIMMs)
AB475A
Server Form Factor and Rack Configuration
The HP Integrity rx4640 is a 4U rack optimized server. It is supported in HP Rack System/E series cabinets and HP 10000 G2 series cabinets. For factory integration order A6977AZ. Sliding mounts and a cable management arm will be installed with the server in a factory integrated rack.
The HP Integrity rx4640 can be installed in the field with the Field Rack Kit (A6977A). This field kit contains the slide mounts, cable management arm, and all other hardware needed to mount an rx4640 into a 19 inch cabinet.
Refer to the 10000 G2 Series Rack Best Practices Guide for information on rack deployment, stabilization and transportation. Go to
http://HP.com/go/rackandpower
for more information.
For stand-alone, non-racked deployments, the HP Integrity rx4640 can be placed into a freestanding tubular frame that wraps around the server (A6979A). This product is not available with factory installation. However, the tubular frame is easily installed in the field.
I/O Architecture
The HP Integrity rx4640 I/O architecture utilizes industry standard PCI X buses in a unique design for maximum performance, scalability and reliability.
The HP Integrity rx4640 architecture uses eight high speed I/O channels. Each channel provides 0.5 GB/s of sustained I/O throughput. The diagram above shows how these channels are used to provide bandwidth to the six available PCI X slots, two reserved PCI X slots, and to multifunction core I/O. The reserved slots, #1 and #2 (counting from the bottom), will always be filled with core I/O. Slot #2 will come factory loaded with a dual channel Ultra320 SCSI card. HP-UX, Linux, Windows, and OpenVMS system can upgrade to a Smart Array card. Slot #1 will come factory loaded with a dual port 10/100/1000Base TX LAN adapter.
Each channel of the SCSI card may be used for either internal or external connection but not both internal and external connections. The factory default configuration is one channel connected to the internal hard disk drive backplane. The second channel is free for use with an external disk shelf (JBOD). The internal disk drives can be set up in a duplex configuration such that each disk has a dedicated SCSI channel. This is called a duplex configuration and is done to enhance server availability. It is often combined with disk mirroring software. The second internal SCSI cable is already in place to support a duplex configuration. Order A9740B for additional components needed on the SCSI backplane of the internal disks for duplex mode. Factory installation is recommended for the A9740B duplex kit.
The two slots at the outside edge of the backplane (slots #7 and #8) each have their own dedicated 64 bit 133 MHz PCI X bus and their own independent 1.0 GB/s I/O channel. These slots should be used for high performance PCI and PCI X cards, such as clustering interconnects or multi port storage adapters. The independent buses and I/O channels provide improved performance and error containment. Independence protects each I/O card from bus hangs or extended latencies due to the failure or high bandwidth demands of other I/O cards. Independence also ensures that each I/O card can achieve maximum throughput. Both of these slots support hot plug operations in HP UX. Hot plug is not supported with the Linux or OpenVMS operating systems.
The remaining four slots (#3 through #6) share two 64 bit 66 MHz PCI X buses, with two slots allocated to each bus. Each pair of slots shares a 0.5 GB/s I/O channel. If a 33 MHz card shares a bus with a 66 MHz card, the faster card will downgrade to 33 MHz. All four of these slots support hot plug operations in HP UX. Hot plug is not supported with the Linux or OpenVMS operating systems.
All I/O slots are keyed for I/O cards with 3.3V signaling. Cards that use 5V signaling are not supported in the HP Integrity rx4640.
Number of Slots
Bandwidth Per Slot
Bus Width
Bus Speed
Hot-Plug
1
Slot Keying
Dedicated
2
1.0 GB/s
64 bits
133 MHz, 66 MHz or 33 MHz
Yes
3.3 Volts
Shared
4
0.5 GB/s per pair of slots (two pairs)
64 bits
66 MHz or 33 MHz
Yes
3.3 Volts
Dual channel Ultra320 SCSI Core I/O
1
0.5 GB/s shared with LAN Core I/O
64 bits
66 MHz
No
3.3 Volts
1000Base TX LAN Core I/O
1
0.5 GB/s shared with SCSI Core I/O
64 bits
66 MHz
No
3.3 Volts
1
NOTE:
Hot Plug I/O operations are only supported with the HP UX operating system. Hot Plug I/O operations are not supported with Linux or OpenVMS.
Supported I/O Cards
HP Integrity rx4640 HP-UX Supported I/O Cards
I/O Card
Product Number
Boot Support
Connector Type(s)
Maximum Cards
Special Notes
Mass Storage Host Bus Adapters
PCI 2 Gb/s Fibre Channel
A6795A
Yes
LC
6
PCI 2 channel Ultra320 SCSI
A7173A
Yes
VHDCI
6
PCI-X 2 channel Smart Array 6402 U320
A9890A
Yes
VHDCI
3
A minimum 512 MB of system memory per card is required for performance considerations
PCI X 2 channel 2 Gb/s Fibre Channel
A6826A
Yes
LC
6
PCI X 266 MHz 1 channel 4 Gb/s Fiber Channel
AB378B
Yes
LC
6
PCI X 266 MHz 1 channel 4 Gb/s Fiber Channel
AB379B
Yes
LC
6
Local Area Network
(LAN)
Adapters
PCI 1 port 1000Base T (gigabit copper)
A6825A
Yes
RJ-45
6
PCI-X 1 port 1000Base T (gigabit copper)
AD331A
Yes
RJ-45
6
PCI 1 port 1000Base SX (gigabit fiber)
A6847A
Yes
Duplex SC
6
PCI-X 1 port 1000Base SX (gigabit fiber)
AD332A
Yes
Duplex SC
6
PCI-X 2-port 1000Base-T
A7012A
Yes
RJ-45
6
PCI-X 2-port 1000Base-SX
A7011A
Yes
Duplex SC
6
PCI-X 2 port 4x Fabric (HPC) Adapter
AB286C
No
4x Infiniband Copper
1
A minimum 512 MB of system memory per card is required for performance considerations
PCI-X 4-port 1000Base-T 1GbE Adapter
AB545A
Yes
RJ-45
6
Multi-Function Cards
(Mass Storage/LAN)
PCI-X 2Gb Fibre Channel / 1000BaseSX
A9782A
Yes
LC
6
PCI-X 2Gb Fibre Channel / 1000BaseTX
A9784A
Yes
1 LC, 1 RJ-45
6
PCI-X 2-port 2-Gb Fibre Channel/2-port 1-Gb Ethernet Adapter
AB465A
Yes
2 RJ-45
6
PCI-X 2-port 1000BT/2-port U320 Multifunction adapter
AB290A
Yes
SCSI - LVD/SE
LAN - RJ-45
6
Wide Area Network
(WAN)
Adapters
2 port Programmable Serial Interface
(PSI) X.25 / Frame Relay / SDLC
J3525A
No
RS-530, RS-232, V.35, RS-449 or X.21
6
Additional Interface Cards
PCI 8 port Serial MUX Adapter
AD278A
No
3
PCI 64 port Serial MUX Adapter
AD279A
No
4
16-port RS-232 RJ45 Port Module
AD280A
No
4 per AD279A
AD280A #001 Port Module Power Supply, required on Port Module (3) and Port Module (4) connected to an AD279A 64P MUX adapter.
16-port RS-232 DB25 Port Module
AD281A
No
4 per AD279A
AD281A #001 Port Module Power
Supply, required on Port Module (3)
and Port Module (4) connected to an
AD279A 64P MUX adapter.
PCI HyperFabric 2 Fibre
1
A6386A
No
LC Duplex
4
A minimum 512 MB of system memory per card is required for performance considerations
PCI ATI Radeon Graphics Adapter
AB551A
No
VGA
2
When adding a single graphics card, must be in slot 8. When adding two graphics cards, they must be in slots 3 and 4.
HP PCI Audio Card
AD317A
No
1
Factory Integration Only
Integrity rx4640 OpenVMS Supported I/O Cards
I/O Card
Product Number
Boot Support
Connector Type(s)
Maximum Cards
Special Notes
Mass Storage Host Bus Adapters
PCI 2 channel Ultra320 SCSI
A7173A
Yes
VHDCI
2
PCI-X 2 channel Smart Array 6402 U320
A9890A
Yes
VHDCI
2
A minimum 512 MB of system memory per card is required for performance considerations.
PCI X 2 channel 2 Gb/s Fibre Channel
A6826A
Yes
LC
6
PCI X 266 MHz 1 channel 4 Gb/s Fiber Channel
AB378B
Yes
LC
6
OpenVMS V8.3 minimum
PCI X 266 MHz 1 channel 4 Gb/s Fiber Channel
AB379B
Yes
LC
6
OpenVMS V8.3 minimum
Local Area Network
(LAN)
Adapters
PCI 1 port 1000Base T (gigabit copper)
A6825A
No
RJ-45
6
PCI-X 1 port 1000Base T (gigabit copper)
AD331A
No
RJ-45
6
OpenVMS V8.3 minimum
PCI 1 port 1000Base SX (gigabit fiber)
A6847A
No
Duplex SC
6
PCI-X 1 port 1000Base SX (gigabit fiber)
AD332A
No
Duplex SC
6
OpenVMS V8.3 minimum
PCI-X 2-port 1000Base-T
A7012A
No
RJ-45
6
PCI-X 2-port 1000Base-SX
A7011A
No
Duplex SC
6
PCI-X 4-port 1000Base-T 1GbE Adapter
AB545A
No
RJ-45
3
Multi-Function Cards
(Mass Storage/LAN)
PCI-X 2Gb Fibre Channel / 1000BaseSX
A9782A
Yes
LC
2
PCI-X 2Gb Fibre Channel / 1000BaseTX
A9784A
Yes
1 LC, 1 RJ-45
2
PCI-X 2-port 2-Gb Fibre Channel/2-port 1-Gb Ethernet Adapter
AB465A
Yes
2 RJ-45
2
PCI-X 2-port 1000BT/2-port U320 Multifunction adapter
AB290A
Yes
SCSI - LVD/SE
LAN - RJ-45
2
Additional Interface Cards
PCI ATI Radeon Graphics Adapter
AB551A
No
VGA
4
When adding a single graphics card, must be in slot 8. Two cards cannot be in shared slots; both 3 and 4 or 5 and 6.
HP Integrity rx4640 Windows Supported I/O Cards
I/O Card
Product Number
Boot Support
Connector Type(s)
Maximum Cards
Special Notes
Mass Storage Host Bus Adapters
PCI Windows and Linux Ultra160 SCSI
A7059A
1
Yes
VHDCI
2
PCI Windows and Linux 2 port Ultra160 SCSI
A7060A
1
Yes
VHDCI
2
PCI 2 channel Ultra320 SCSI
A7173A
Yes
VHDCI
2
PCI X Smart Array P600 Serial Attached SCSI (SAS) Controller (for external storage only)
337972-B21
Yes
SFF8470
3
Each 337972 B21 external port
supports a maximum of two (2)
MSA50s attached in series.
PCI X 2 channel Smart Array 6402 Ultra320
A9890A
Yes
VHDCI
3
A minimum 512 MB of system memory per card is required for performance considerations.
512 MB cache memory upgrade for SA640x and SA P600 controller
372538-B21
N/A
N/A
N/A
PCI X 2 Gb/s Fibre Channel
A7298A
1
Yes
LC
4
PCI X 2 Gb/s Fibre Channel
AB232A
1
Yes
LC
4
PCI X 1 channel 2 Gb/s Fibre Channel Windows
AB467A
Yes
LC
4
PCI X 2 channel 2 Gb/s Fibre Channel Windows
AB466A
Yes
LC
4
Local Area Network
(LAN)
Adapters
PCI 2 port Windows/Linux 1000Base SX
A9899A
No
LC
4
PCI 2 port Windows/Linux 1000Base TX
A9900A
No
RJ-45
4
PCI 1 port 1000Base T
A7061A
No
RJ-45
4
PCI 1 port 1000Base SX
A7073A
No
Duplex SC
4
1
Supported, but card is no longer orderable
HP Integrity rx4640 Linux RHEL 4 U4, SLES 9 SP3, and SLES 10 Supported I/O Cards
I/O Card
Product Number
Boot Support
Connector Type(s)
Maximum Cards
Special Notes
Mass Storage Host Bus Adapters
PCI Windows and Linux Ultra160 SCSI
A7059A
Yes
VHDCI
6
PCI Windows and Linux 2 port Ultra160 SCSI
A7060A
Yes
VHDCI
6
PCI 2 channel Ultra320 SCSI
A7173A
Yes
VHDCI
6
PCI X Smart Array P600 Serial Attached SCSI (SAS) Controller (for external storage only)
337972-B21
Yes
SFF8470
3
PCI X 2 channel Smart Array 6402 Ultra320
A9890A
Yes
VHDCI
3
A minimum 512 MB of system memory per card is required for performance considerations.
512 MB cache memory upgrade for SA640x and SA P600 controller
372538-B21
N/A
N/A
N/A
PCI X 2 channel 2 Gb/sFibre Channel
A
À̸§
Æнº¿öµå
ºñ¹Ð±Û